| |
*Note: There is a Minimum Order of $50.00 for all Handler Products. Any orders less than $50.00 will be charged a processing fee. |
Top
44 Atlas Flask |
|
44U Atlas Flask
This UPPER Flask is constructed of special alloy bronze to provide years of durable service. Fitted with hardened stainless steel alloy rear tapered guide pins, this ejector type flask has long been a favorite of leading Prosthodontists, dental schools and commercial laboratories. Dropped forged with glass-like smooth surfaces, models are easily ejected with the aid of the bottom ejection disc.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4” long x 3 3/4” wide x 2 1/4” high [10cm x 10cm x 6cm]
44L Atlas Flask
This LOWER Flask is constructed the same as the Upper Atlas Flask, but with a slanted heel section to accommodate cases with high condyles. Its tapered rear guide pins, smooth interior and special bronze alloy provide ease of function during flasking and de-flasking operations.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4” long x 3 3/4” wide x 2 1/4” high [10cm x 10cm x 6cm] |
Part # |
Description |
Price |
| 44U |
Upper Flask |
$83.50 |
| 44L |
Lower Flask |
$83.50 |
|
Top
44G Atlas Giant Flask |
|
When conventional size flasks are not large enough, the 44G should be utilized. Cast of bronze alloy, the 44G is widely used in reconstructive maxillo-facial procedures. The 44G is fitted with three separate sections, a bottom K.O. disc and rear, tapered stainless steel guide pins for easier flasking and de-flasking.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions:
4 5/8” long x 4 3/8” wide x 2 3/4” high [12cm x 11cm x 7cm] |
Part # |
Description |
Price |
| 44G |
Atlas Giant Flask |
$307.79 |
|
Top
Bronze K.O. Disc |
|
44D: Bronze K.O.
Disc for 44 UPPER, LOWER, and Atlas GIANT Flasks. Also fits varsity Flasks.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 7/16” diameter x 3/16” high [7cm x 1cm]
22D: Bronze K.O.
Disc for 22C UPPER and LOWER Flask.
Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 5/8” diameter x 3/16” high [7cm x 1cm] |
Part # |
Description |
Price |
| 44D |
K.O Disc |
$17.45 |
| 22D |
K.O Disc |
$ |
|
Top
Denture Flasks Compresses 61 Flask Compresses |
|
61A One Flask Compress
For use in curing a single flask. Built of bronze alloy with stainless steel compensatory springs. Provides years of service.
Shipping Wgt.: 7 lbs [3.2 Kg] Unit Dimensions: 4 3/4” long x 2 7/8” wide x 5 3/4” high [12cm x 7cm x 15cm]
61B Two Flask Compress
For use in curing two Flasks simultaneously. Our most popular denture compress is built to hold two conventional flasks. Sturdily built of bronze alloy, its rustproof cast body will provide years of service. Two stainless steel springs give equalized compensatory pressure during curing operation. A suitable allen wrench, wood capped holding handle and brass lifting handle are supplied with each compress.
Shipping Wgt.: 8 lbs [3.6 Kg] Unit Dimensions: 4 1/8” long x 2 1/2” wide x 7 1/2” high [11cm x 6cm x 19cm]
61C Three Flask Compress
For use in curing three flasks simultaneously, same as above compresses but with three flask capacity.
Shipping Wgt.: 9 lbs [4.0 Kg] Unit Dimensions: 5” long x 2 5/8” wide x 10 3/4” high [13cm x 7cm x 27cm] |
Part # |
Description |
Price |
| 61A |
One Flask Compress |
$167.75 |
| 61B |
Two Flask Compress |
$150.89 |
| 61C |
Three Flask Compress |
$184.59 |
|
Top
Denture Flasks Presses 33 Little Giant |
|
A Flask Press manufactured for pressing a single flask. Constructed of malleable/ductile iron, the Little Giant will provide years of trouble free service under normal pressing procedures.
Inside dimensions: 5” wide x 4” max. height [13cm x 10cm]. Order with 38A bench clamps.
Shipping Wgt.: 12 lbs [5.4 Kg]
Unit Dimensions: 7 3/4” long x 3 1/2” wide x 7 3/8” high [20cm x 9cm x 19cm] |
Part # |
Description |
Price |
| 33 |
Little Giant |
$104.50 |
|
Top
38 Big Boy Flask Press |
|
A Heavy Duty Single Flask Press manufactured of malleable/ductile cast iron for durability and long wear. Press is provided with alloy steel shaft, grey iron handle and malleable/ductile iron pressure plate. Holes in frame allow for easy bench mounting, or 38A Clamps may be utilized for easy bench mounting and/or removal. Big Boy Flask presses are designed for the busy laboratory.
Shipping Wgt.: 23 lbs [10.4 Kg]
Unit Dimensions: 10” long x 4 1/2” wide x 8 1/2” high [25cm x 11cm x 22cm] |
Part # |
Description |
Price |
| 38 |
Big Boy Flask Press - 1 Flask |
$142.00 |
|
Top
38B Big Boy Flask Press |
|
A Heavy Duty Two Flask Press manufactured of malleable/ductile cast iron. Features are the same as 38 Press, except this unit is designed to accommodate two flasks simultaneously. Both 38 and 38B Big Boy Presses are designed for the busy laboratory. May be utilized with 38A Clamps for easy bench mounting.
Shipping Wgt.: 24 lbs [10.9 Kg]
Unit Dimensions: 10” long x 4 1/2” wide x 10” high [25cm x 11cm x 25cm] |
Part # |
Description |
Price |
| 38B |
Big Boy Flask Press - 2 Flask |
$167.01 |
|
Top
39 Deluxe Manual Press |
|
This robust press is built by Handler to give the laboratory technician excellent hand pressing action when trial packing dentures. The Deluxe Press is manufactured from 1” steel plate with a 1”diameter acme threaded center screw. The large chrome plated handle allows the technician to apply accurate pressure as dictated by the individual case. Should the center screw or threaded insert ever require replacement, both are replaceable. Provided in a durable baked finish with chrome plated steel supports, handle and center screw, this press will prove a welcome addition to your laboratory.
Shipping Wgt.: 24 lbs [10.9 Kg]
Unit Dimensions: 12” high x 6” wide x 12” long [31cm x 15cm x 31cm] |
Part # |
Description |
Price |
| 39 |
Deluxe Manual Press |
$319.00 |
|
Top
|
|
| |
Last updated: 9/6/2011 |
|
| |
|
|
