| |
*Note: There is a Minimum Order of $50.00 for all Handler Products. Any orders less than $50.00 will be charged a processing fee. |
Lathes & Motors |
| While providing a variety of horsepower ratings and speeds for the technician, Red Wing motors are known world wide for quality, dependability and affordability. Precision turned shafts made of alloy steel and double shielded ball bearings insure the smooth movement of both tapered and straight shafts. When introduced in 1920, Red Wing motors provided the precision and torque required by the dental and industrial trades. We are certain you will find Handler Red Wing motors the quiet, strong producer for your lab or manufacturing facility. |
26A Red Wing Lathe |
|
A full 1/4 HP, 1725/3450 rpm lathe for use on top of laboratory bench (115 Volts/60Hz). Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Shipped with standard dental, tapered shafts, each lathe includes a right and left chuck remover, which provides ease of removal of standard dental chucks. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding. This unit may be supplied with 1/2” [1.3cm] straight shafts when specified. Available in 115 Volts/50Hz, 220/50Hz and 220/60Hz at additional charge. NOTE: Specify No. 26AS for motor with 1/2” [1.3cm] straight shafts.
Shipping Wgt.: 39 lbs [17.7 Kg]
Unit Dimensions: 15 1/2” long x 7 7/8” wide x 7 1/4” high [39cm x 20cm x 18cm] |
Part # |
Description |
Price |
| 26A |
Red Wing Lathe |
$271.00 |
|
26 Red Wing Lathe |
|
A full 1/4 HP, 1725/3450 rpm two speed polishing lathe with 6” [15.2cm] shaft height (115 Volts/60Hz). Designed and built for use as a polishing lathe, its tapered shafts will accept standard dental tapered chucks. The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter
buffing wheels for pumice and dry polishing operations. This unit may be supplied with 1/2” [1.3cm] straight shafts when specified. Available in 115 Volts/ 50Hz 26A, 220 Volts/50Hz 26E and 220 Volts/60Hz 26C at additional charge.
NOTE: Specify No. 26S for motor with 1/2” [1.3cm] straight shafts.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2” long x 8” wide x 9” high [39cm x 20cm x 23cm] |
Part # |
Description |
Price |
| 26 |
Red Wing Lathe |
$275.00 |
|
Top
27 Red Wing Lathe |
|
A full 1/4 HP single speed 3450 rpm polishing motor with a 6” [15.2cm] shaft height (115Volts/60Hz). Designed to be utilized by the technician who desires a single speed polishing motor where a 3450 rpm speed is used exclusively for polishing. This unit may be supplied with 1/2” [1.3cm] shafts when specified. Available in 115 Volts/50Hz, 220 Volts/50Hz and 220 Volts/60Hz at additional charge.
NOTE: Specify No. 27S for motor with 1/2” [1.3cm] straight shafts.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2” long x 7 7/8” wide x 7 1/4” high [39cm x 20cm x 18cm] |
Part # |
Description |
Price |
| 27 |
Red Wing Lathe |
$284.15 |
|
28L Red Wing Lathe |
|
A 1/3 HP two speed 1725/3450 rpm polishing motor with 4 1/2” shaft height. Built for the technician who requires additional torque, the 28L contains standard dental tapered shafts with chuck removers. This durable motor will provide years of service for your laboratory. Available in 115 Volts/60Hz as a standard product, the 28L is also built in 115 Volts/50Hz 28D, 220 Volts/50Hz 28E and 230 Volts/60Hz 228L-E at additional charge.
NOTE: Specify No. 28LS for motor with 1/2” [1.3cm] straight shafts.
Shipping Wgt.: 40 lbs [18.1 Kg]
Unit Dimensions.: 15 3/4” wide x 7 7/8” deep x 7 1/2” high [40cm x 20cm x 18cm] |
Part # |
Description |
Price |
| 28L |
Red Wing Lathe |
$317.69 |
|
Top
28H Red Wing Lathe |
|
A 1/3 HP two speed 1725/3450 rpm high base polishing motor with 6” shaft height. Built to accommodate larger diameter buffs and chuck accessories, the 28H provides added torque for the frequent polisher. The unit is shipped with standard dental tapered shafts with chuck removers. Available in 115 Volts/60Hz and 115 Volts/50Hz, 220 Volts/50Hz and 220 Volts/60Hz at additional charge.
NOTE: Specify No. 28HS for motor with 1/2” [1.3cm] straight shafts.
Shipping Wgt.: 42 lbs [19.5 Kg]
Unit Dimensions.: 15 3/4” wide x 7 7/8” deep x 8 3/4” high [40cm x 20cm x 22.2cm] |
Part # |
Description |
Price |
| 28H |
Red Wing Lathe |
$326.00 |
|
29 Red Wing Motor |
A full 1/2 HP single speed 3450 rpm polishing motor with 6 3/8” [16.2cm] shaft height (115 Volts/60Hz). Built for heavy use by the technician and polisher, the rugged polishing motor will provide years of trouble free service. The 29 is manufactured with 1/2” [1.3cm] straight shafts, and is shipped complete with one each left and right #20 tapered chucks. Ideal for the laboratory or manufacturer who performs constant polishing or grinding operations. Available in 220 Volts/60Hz and 220 Volts/50Hz at additional charge.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions.: 18 1/2” long x 7 3/4” wide x 9” high [47cm x 20cm x 23cm] |
|
Part # |
Description |
Price |
| 29 |
Red Wing Lathe |
$317.65 |
|
Top
29A Red Wing Motor |
|
A full 3/4 HP single speed 3450 rpm polishing motor with 6 3/8” [16.2cm] shaft height (115 Volts/60Hz). Built for extra heavy duty use by the dental technician or industrial polisher, who requires extra torque. The 29A is manufactured with 1/2” [1.3cm] straight shafts, #20 tapered chucks for use with large buffs, brushes and similar chucks. Available in 220 Volts/60Hz and 220 Volts/50Hz at additional charge.
Shipping Wgt.: 47 lbs [21.3 Kg]
Unit Dimensions.: 18 1/2” long x 7 3/4” wide x 9” high [47cm x 20cm x 23cm] |
Part # |
Description |
Price |
| 29A |
Red Wing Lathe |
$326.05 |
|
Chucks |
| Handler precision chucks are available in many configurations. Manufactured of alloy steel, brass and hardened steel, Handler chucks are made in various designs to provide manual, semi-automatic and automatic changing of burs, mandrels, abrasives, buffs and brushes. High Speed Spindles for grinding and finishing of hard alloys are available with automatic mandrel changing capability. We will gladly discuss your particular chuck requirements. Chucks made by Handler are known world wide for function and reliability. Special chucks made to your specifications may be quoted. |
Top
1-6 Stone Chucks |
|
Stone Chucks are designed to accommodate abrasive wheels with various inside diameters as indicated below. Handler stone chucks are manufactured to exacting standards from quality brass. For use only on tapered lathe shafts. Specify chuck number (below) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
3/4” diam x 2” long [2cm x 9cm] |
Part # |
Description |
Price |
| 1 |
Stone Chuck for 3/8” [1cm] I.D. (hole size) Wheel - RIGHT |
$8.95 |
| 2 |
Stone Chuck for 3/8” [1cm] I.D. (hole size) Wheel - LEFT |
$8.95 |
| 3 |
Stone Chuck for 5/16” [0.8cm] I.D. (hole size) Wheel -RIGHT |
$8.95 |
| 4 |
Stone Chuck for 5/16” [0.8cm] I.D. (hole size) Wheel - LEFT |
$8.95 |
| 5 |
Stone Chuck for 1/4” [0.6cm] I.D. (hole size) Wheel - RIGHT |
$8.95 |
| 6 |
Stone Chuck for 1/4” [0.6cm] I.D. (hole size) Wheel - LEFT |
$8.95 |
|
7 Tapered Steel Chuck |
|
The No. 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts.
Specify 7L (Left) or 7R (Right) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
5/8” diam x 3 5/8” long [2cm x 9cm] |
Part # |
Description |
Price |
| 7 Brass |
Tapered Brass Chuck |
$8.95 |
|
Top
7B Tapered Brass Chuck |
|
The No. 7B tapered chuck is designed exactly as the No. 7 steel chuck, except it is made with brass. These chucks provide easier on/off placement onto tapered dental shafts, causing less shaft wear.
Specify 7BL (Left) or 7BR (Right) when ordering.
Shipping Wgt.: 6 oz [107 g]
Unit Dimensions:
5/8” diam x 3 5/8” long [2cm x 9 cm] |
Part # |
Description |
Price |
| 7 Steel |
Tapered Steel Chuck |
$8.95 |
|
8 Jacobs Type Jr. Chuck |
|
The No. 8 chuck is designed for use on polishing motors which have a 1/2” [1.3cm] straight shaft. All specifications are identical to the 8T, except for its adaptation onto a 1/2” [1.3cm] shaft.
NOT available for the left shaft of a motor.
Shipping Wgt.: 10 oz [238 g]
Unit Dimensions: 4 1/4” long x 1” diam [11cm x 3cm] |
Part # |
Description |
Price |
| 8 |
Jacobs Type Jr. Chuck-1/2" Shaft |
$28.25 |
|
Top
8T Jacobs Type Jr. Chuck |
|
The 8T chuck is designed specifically for use with small burs and mandrels which do not exceed 1/4” [0.6cm] in diameter. The 8T is built to be a less expensive and semi-precise adjustable chuck for use on lathes with tapered shafts. Available for the RIGHT side of a lathe only, this chuck opens with a CCW twist and closes with a CW twist.
NOTE: For 1/2” shaft order #8
Shipping Wgt.: 8 oz [227 g]
Unit Dimensions: 2 1/4” long x 1” diam [6cm x 3cm]
AVAILABLE FOR 1/2” SHAFT |
Part # |
Description |
Price |
| 8T |
Jacobs Type Jr. Chuck |
$28.25 |
|
9 Arbor Band |
|
Designed to accommodate 3/4” diameter x 3/4” wide [1.9cm x 1.9cm] abrasive bands. Manufactured of alloy steel and plated to fit onto standard dental tapered shafts, the abrasive band is held in place by tightening the end screw against the rubber arbor.
Specify 9L (Left) or 9R (Right) when ordering.
Shipping Wgt.: 8 oz [227 g]
Unit Dimensions: 4 7/8” long x 13/16” diam [12cm x 1cm] with a 1/4” diam shank |
Part # |
Description |
Price |
| 9 |
Arbor band |
$17.95 |
|
Top
12 Stone Chuck |
|
Designed with a 1/4” [0.6cm] shank for use in Jacobs type chucks. This stone chuck accommodates abrasive stones with 1/4” [0.6cm] I.D. arbor only. Manufactured of alloy steel and plated.
Specify 12L (Left) or 12R (Right) when ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 3/16” long x 3/4” diam [6cm x 2cm]
with a 1/4” diam shank. |
Part # |
Description |
Price |
| 12 |
Stone Chuck-1/4" Shank |
$7.67 |
|
13-1 Tapered Chuck |
|
Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. This tapered chuck is built to accept small buffs, brushes and lead-centered wheels. Made of alloy steel and plated.
Specify 13-1L (left) or 13-1R (right) when ordering. Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8” long x 1/2” diam [7cm x 1.3cm]
with a 1/4” diam shank. |
Part # |
Description |
Price |
| 13-1 |
Tapered Chuck |
$ |
|
Top
13 Arbor Band Chuck |
|
Designed with 1/4” [0.6cm] shank for use in Jacobs type chucks. Accepts 3/4” x 3/4” [1.9cm x 1.9cm] abrasive arbor bands. Manufactured of alloy steel and plated.
Specify 13L (Left) or 13R (Right) when ordering.
Shipping Wgt.: 4 oz [113 g]
Unit Dimensions: 2 5/8” long x 3/4” diam [7cm x 2cm]
with a 1/4” diam shank. |
Part # |
Description |
Price |
| 13 |
Arbor Band Chuck-1/4" Shank |
$9.38 |
|
67A Auto-Chuck Kit |
|
An automatic chuck kit designed specifically for the changing of the chuck attachments listed below while lathe is in motion. The Auto-Chuck provides the user with fast chuck changing at a lower cost than many precision chucks. This chuck is designed for gross reduction and rough trimming. Easily installs onto a dental tapered shaft. The 67A kit includes a wrench for tightening the bur adapter. Specify for Right or Left side.
Kit includes:
67-0 Auto-chuck Qty - 1
67-4 Wrench Qty - 1
67-5 Stone Chuck Qty - 1
67-7 Tapered Chuck Qty - 1
67-8 3/32” [0.2cm] Bur Chuck Qty - 1
67-9 Arbor Chuck Qty - 1
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions:
5” long x 3 3/4” deep x 1” high [12.7cm x 9.5cm x 2.6cm] |
Part # |
Description |
Price |
| 67A |
Auto-Chuck Kit |
$79.35 |
|
Top
18 Atlas Precision Chuck |
|
The No. 18 Atlas chuck is a precise “Jacobs type” chuck for use with chuck accessories having a diameter of .001” [0.03mm] to .250” [6.4mm]. The 18 Atlas chuck attaches to the right shaft of a dental lathe with standard dental tapered shafts. Machined to precision limits, the 18 Atlas provides the technician with concentricity unmatched by any other adjustable chuck.
For Right shaft only.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2” long x 1 1/4” diam [6cm x 3cm |
Part # |
Description |
Price |
| 18 |
Atlas Precision Chuck (German Made) |
$89.00 |
|
67-0 Auto-Chuck |
|
Auto-Chuck only for use with above mentioned attachments. Automatically changes above chucks while lathe is in motion.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2” long x 1” diam [6cm x 3cm] |
Part # |
Description |
Price |
| 67-0 |
Auto-Chuck |
$58.20 |
|
Top
20 Tapered Chuck |
|
A tapered chuck manufactured of steel alloy for use on 1/2” [1.3cm] straight or 5/8” [0.6cm] straight shafts. Available for the Left or Right side of a polishing motor, this chuck provides the user with a heavy duty chuck for use with buffs, brushes and lead centered accessories. Mounts with set screws.
When Ordering, please specify
20L 1/2” [1.3cm] 20R 1/2” [1.3cm]
20L 5/8” [1.6cm] 20R 5/8” [1.6cm]
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3/4” diam x 4 1/4” long [2cm x 11cm] |
Part # |
Description |
Price |
| 20 |
Tapered Chuck-1/2" or 5/8" Diameter |
$9.65 |
|
67B Auto-Chuck II |
|
The Auto-Chuck II was designed to interchange 3/32” [0.2cm] burs and mandrels while lathe is in motion. By simply placing finger pressure on the outer, frontal shell of this chuck, burs and mandrels may be changed without slowing or stopping the dental lathe. Constructed of alloy steel with hardened steel cylindrical bearings, the Auto-Chuck II will provide precise bur changing while saving valuable time. Installs on the tapered shaft of dental lathes. For Right side only.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3 1/2” long x 1” diam [8.9cm x 2.6cm] |
Part # |
Description |
Price |
| 67B |
Auto-Chuck II |
$64.80 |
|
Top
Chuck Changers |
| Handler precision chucks are available in many configurations. Manufactured of alloy steel, brass and hardened steel, Handler chucks are made in various designs to provide manual, semi-automatic and automatic changing of burs, mandrels, abrasives, buffs and brushes. High Speed Spindles for grinding and finishing of hard alloys are available with automatic mandrel changing capability. We will gladly discuss your particular chuck requirements. Chucks made by Handler are known world wide for function and reliability. Special chucks made to your specifications may be quoted. |
16 Chuk/Changer |
|
The Handler Chuk/Changer was designed to provide full automatic, precision changing of 1/4” [0.6cm] and 3/32” [0.2cm] diameter burs, mandrels and chuck accessories with the slight movement of a handle while the motor is turning. The Chuk/Changer provides the technician with exacting concentricity and quick, easy changing of various chucks which greatly speeds grinding, polishing and finishing procedures. The No.16 Chuk/Changer is adaptable to most types of dental motors, including older models e.g. R & M, Ritter, Baldor, Emesco and Red Wing.
The No.16 is shipped complete with chuck accessories as follows:
- P-16-15 Arbor Band Chuck Qty - 1
- P-16-16 Spiral Tapered Chuck Qty - 1
- P-16-19 Stone Chucks Qty - 2
- P-16-20 Mandrels for small abrasive wheels Qty - 2
- P-16-8 Collet Wrench Qty - 1
- P-16-10 Clutch Qty - 1
- P16-ADW Adapter Qty - 1
NOTE: Specify make, model and catalogue number of lathe
when ordering. 16L Chuk/Changer is for use on left side of motor.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 8 3/4” long x 4” wide x 6 1/4” high [22cm x 10cm x 16cm] |
Part # |
Description |
Price |
| 16 |
16 Chuck/Changer W/Accessories |
$302.60 |
| 16-0 |
16 Chuck/Changer W/O Accessories |
$277.30 |
|
Top
16B Chuk/Changer with Lathe |
|
The 16 Chuk/Changer is factory installed to the right side of a 26A Low Base, Red Wing Lathe. This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds. The movement of the activating handle allows the technician to change from 1/4” [0.6cm] to 3/32” [0.2cm] burs, mandrels and chuck accessories without stopping the lathe. This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included. 16B combination shipped on LOW BASE 26A lathe 4 1/2” shaft height unless otherwise specified.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions:
18 3/4” long x 8” wide x 8 1/8” high [48cm x 20cm x 21cm]
16B-1 No. 16 Chuk Changer mounted on 26 high base lathe (16” shaft hgt). |
Part # |
Description |
Price |
| 16B |
16B Chuck/Changer on 26A Lathe - Low Base |
$583.25 |
| 16BBL |
Lathe with chuck changer on both sides |
$ |
|
16SB Chuck Changer |
|
A combination of a 28L 1/3 HP two speed polishing motor and a Handler Chuk/Changer. The addition of a higher torque motor with a Chuk/Changer will provide the technician with years of chuck changing efficiency. The 16SB will save time while assuring accuracy for the technician who frequently interchanges 3/32” and 1/2” diameter burs, mandrels and chuck accessories. Shipped complete in 115 Volts/60Hz.
Available in 115 Volts/50Hz, 220 Volts/50Hz and 230 Volts/60Hz at additional charge.
Shipping Wgt.: 46 lbs [20.9 Kg]
Unit Dimensions.: 19” wide x 8” deep x 8 1/8” high
[48.3cm x 20.3cm x 23cm] |
Part # |
Description |
Price |
| 16SB |
Chuk/Changer on 28L |
$623.00 |
|
Top
16SB-1 Chuk Changer |
|
A Chuk/Changer in combination with a high base 1/3 HP two speed polishing motor No. 28. The 16SB-1 will allow the technician to utilize larger diameter buffs and abrasives, while obtaining the accuracy and speed of interchanging both 3/32” [2.3 mm] and 1/2” [6.6 mm] burs, mandrels and chuck accessories while the lathe is in motion. Shipped complete in 115 Volts/60Hz. Available in 115 Volts/50Hz, 220 Volts/50Hz and 230 Volts/60Hz at additional charge.
Shipping Wgt.: 47 lbs [21.3 Kg]
Unit Dimensions.: 19” wide x 8” deep x 8 1/8” high [48.3cm x 20.3cm x 23cm] |
Part # |
Description |
Price |
| 16SB-1 |
Chuk/Changer on 28H |
$631.00 |
|
16B-1 No. 16 Chuk/Changer |
|
Factory installed onto a No. 26 high base, Red Wing Lathe.
Shipping Wgt.: 46 lbs [20.9 Kg]
Unit Dimensions:
18 3/4” long x 8”wide x 9 1/8” high[48cm x 20cm x 23cm] |
Part # |
Description |
Price |
| 16B-1 |
Chuk/Changer on 26 Lathe |
$591.25 |
|
Top |
|
| |
Last updated: 11/4/2011 |
|
| |
|
|
|
